Keg Dispensing Supplies

The "G" type coupler is sometimes known as a Bass keg coupler or tap. This is the style of coupler used on Bass, Boddington's, Anchor, Grolsch, Old Speckled Hen, Innis & Gunn and Watney's kegs, among others. Without this style of coupler, it may be hard to get beer out of kegs from those breweries! This coupler comes with the gas side connections, but does not come with the 3/16" liquid tailpiece, beer nut or neoprene washer needed for the liquid side.

The Keg Line Cleaning Kit is the key to keeping your faucets, lines, and couplers clean. This kit includes a hand pump and cleaning solution container that attaches to your faucet shank, a 32 oz. bottle of Superflush Keg and Line Cleaner, a double ended faucet brush and a spanner wrench for removing faucets and attaching the cleaning pump.

Simply mix the Superflush Keg and Line Cleaner at the recommended rate of 2 to 3 oz. per gallon of water and use this solution to soak faucet and coupler parts. Remove the faucet from the shank using the spanner wrench, and attach the cleaning solution container to the shank with the spanner wrench. Pump solution through the liquid line and out into a bucket, then allow solution to sit in the lines for a few minutes. Fill the cleaning solution container with water and pump through to flush lines. Use the double ended brush to clean faucet and coupler, then flush with water and reassemble. Repeat when changing kegs to keep beer flowing free of foaming issues, beer stone buildup and bacterial infection.

German beer lovers rejoice! This "A" style German slider keg coupler, also known as a tap, is just what you need to get beer flowing from German kegs! This coupler is like no other, with a cupped mount that slides onto the keg and locks in place when engaged. This is the most widely used keg coupler in Germany, and while it will not work with all German beer kegs, it does work with most of them, as well as with a few Belgian kegs. Among the breweries that use the "A" coupler are Ayinger, Achouffe, Bitburger, Franziskaner, Hacker-Pschorr, Hoegaarden, Paulaner, Spaten, and Warsteiner. This coupler comes with the gas side connections, but does not include the liquid side connections which consist of a 3/16" liquid tailpiece, a beer nut and a neoprene washer.

A 3-way manifold is the perfect way to carbonate three kegs at once, or to pressurize kegs and run a Blichmann BeerGun at the same time! The CO2 can be hooked up from the regulator via the barb on the side of the manifold using standard 5/16" ID Bevlex tubing and worm clamps, and the other barbs can be run with the same tubing to gas disconnects for carbonating and dispensing from kegs, or to other CO2 driven devices. When mounted, the barbs run straight downward. Includes shutoff valves on the three top barbs on the manifold, which give another level of protection from lost CO2!

This is a black plastic flange, the type that comes with standard beer shanks. It makes your custom kegerator look nice and professional, covering up drilled holes and providing a nice background for your beer faucet. If yours are damaged, replace them with this flange!

This is a replacement chrome collar for standard faucets. It fits on top of the bonnet and threads over the faucet lever. An excellent replacement for missing or damaged collars on standard faucets!

Smooth and straight! This flange for the inside of your beer tower is made of black plastic. It is curved on one side to fit the curvature of the beer tower. The lock nut can be tightened up against the flange in order that everything is straight on your kegerator! These flanges sometimes get damaged or lost. This flange is the perfect replacement for most flanges on standard sized beer towers.

The name Perlick has been in the beverage industry for a long time, and has always been associated with high quality draft equipment. The 630SS is no exception. This faucet is forward-sealing so there is less chance of bacterial and yeast activity. A high-quality forward sealing faucet such as this will need to be cleaned less frequently than an inferior back-sealing standard faucet. Being all-stainless, this Perlick faucet is built to last! Staying strong long after other metals begin to degrade, a stainless steel Perlick faucet is something of a long-term investment, but well worth the price!

Bevlex tubing is a high quality thick-walled tubing. This 3/16" tubing works well for beer line, as it is the standard inner diameter for most serving systems. While the thinner walled tubing may also be used, this thick-walled tubing is recommended for permanent installations, such as on a kegerator or keezer dispensing system. It is also recommended when a thicker wall would come in useful. It is more durable and can withstand more pressure than the thinner-walled version.

Inner Diameter: 3/16 in.
Outer Diameter: 7/16 in.

This is a replacement brass lock nut for the shank on your tower. It works perfectly well on most standard tower shanks used in beer towers. If you need a replacement, we've got one for you right here!

Oetiker clamps provide a permanent clamping solution! This style of clamp has a 1-ear design, which means they are crimped at a single point on the clamp to create a superior seal over your tubing. These medium Oetiker clamps are often used on 3/16" thick-walled tubing that is used in some liquid applications and in draft systems. These clamps hold tight, creating a great seal that holds for a long time! Some people prefer these for more permanent systems. If you are looking to switch over to a snug seal that lasts, make sure you use Oetiker clamps!

This stainless steel splicer has 5/16" splicers on both sides. It can be used to connect two lengths of hose with a 5/16" ID together. This is a standard size for liquid siphon line, but these fittings can be used in gas applications as well.

Turn your fridge into a kegerator with our kegerator homebrew kegging system! This system comes with all the internal workings of a kegerator system you will need, except the CO2 cylinder.

Included is a high quality Taprite regulator, ball lock gas line assembly, a brand new 5 gallon cornelius keg, a ball lock liquid disconnect with swivel nut set, 6 feet of 3/16" ID Bevlex thick-walled liquid tubing, and a full stainless steel shank assembly that includes a SS standard beer faucet, faucet knob, 4" SS shank, 1/4" tailpiece, beer nut and neoprene washer. Make the draft system you have always wanted with this kegerator kegging system, complete with a brand spankin' new keg and stainless steel serving equipment!

All you'll need in addition to this kit to make the ultimate kegerator, is a full CO2 tank. For local customers we sell full tanks at all of our retail locations!

The Flex Tap is the perfect system for dispensing beer out of sanke kegs, and we have the replacement CO2 bulbs to run it! These 74 gram CO2 bulbs will typically work to dispense 7.5 gallons of beer, meaning that you can do about half of a full 1/2 barrel keg with one bulb. Be sure to have extras on hand!

The original Guinness coupler! This keg coupler, popularly known as a tap, works on Guinness, Harp and Kilkenny kegs, as well as Smithwicks, Magners and a few select others. It is a "U" style keg coupler that is not commonly used by breweries, but is used by those mentioned. If you want to tap a keg of any of these, you will need a "U" coupler! This coupler includes the gas side connections. Not included is the a 3/16" liquid tailpiece, beer nut and neoprene washer.

Is your tap handle too short? Not visible or prominently displayed, like you would like? Look no further than this chrome extension to solve your tap handle woes! This 1-inch chrome extension is placed between your faucet and tap handle to extend it outwards. Simple to use and effective, get the right length for your tap handle today!

3/16" is the standard inner diameter for most serving systems. This 3/16" tubing is thin walled and very economical. We use it in making our dispensing line assemblies. It is durable and works well in most dispensing applications.

Inner Diameter: 3/16 in.
Outer Diameter: 5/16 in.

A black plastic picnic faucet comes in handy in a pinch! Affectionately referred to as a cobra tap, this is a fairly simple dispensing mechanism. When the lever is pressed, the rubber gate is lifted, allowing beer to flow. These picnic faucets come apart easily for cleaning, and feature a barbed end that can fit on standard beer line. Make your own or keep one on hand in case the unthinkable happens!

A bonnet angler is a little piece that comes in handy when trying to use an extra-long tap handle on a kegerator that has a flat surface, such as a converted refridgerator. Often, a longer tap handle won't have the clearance necessary, and will hit the body of the kegerator, not able to fully shut the beer faucet. Alleviate these problems with a bonnet angler! The bonnet angler creates a slight forward lean, giving you room to proudly display your long tap handles!

This stainless steel tee is perfect for gas application, but can be used wherever a tee with hose barb fittings is required. It has three 3/8" barb connections, one on all ends, and is therefore able to split gas off in two separate directions from the source.

A Y-shaped connector used to split CO2 from a regulator that only has one outlet to two. Measurements are 1/4" MPT X 1/4" FPT X 1/4" FPT. Perfect for use in sending CO2 to both a keg and the Blichmann BeerGun at the same time! Also useful in other applications when CO2 needs to be split two ways.